TP 304 Capillary Tube, SS Capillary Pipe, 304 capillary tube with 1/16″OD, 1/8 inch OD and thin Wall thickness, SS Needle tube ,SS 304, S316L Capillary pipe Duplex 2205 capillary pipe, Monel400, Inconel 825 capillary pipe. Stainless steel coiled tubing, stainless steel bening pipe, 316L Steel rolled pipe.bending stainless steel tubing into coil, 316L straight capillary tube,downhole compeletion tools, capillary tube Seamless Capillary Tube Coil Stainless Steel Pipe Coiled Tubing Chemical Injection Line,STAINLESS STEEL CAPILLARY TUBE SUPPLIERS,304 STAINLESS STEEL CAPILLARY PIPE, STAINLESS STEEL 316L CAPILLARY TUBE, SEAMLESS STAINLESS STEEL CAPILLARY TUBE MANUFACTURER CHINA,STAINLESS STEEL WELDED CAPILLARY TUBE, STAINLESS STEEL CAPILLARY TUBE EXPORTER, STAINLESS STEEL 316L CAPILLARY PIPE SUPPLIER, SS CAPILLARY TUBE FACTORY in China. SS316L grade Capillary pipe Manufacture in China.
Capillary tubes with a maximum bore of 0.0158 in., available in a wide range of stainless steels. Alleima capillary tubes are characterized by tight tolerances, and the inside surface of the tubes is free from oil, grease and other particles. This ensures, for example, an optimized and even flow of liquids and gases from the sensor to the measuring instrument
SS CapillaryTube are widely used in making shock absorber, gas spring applications, tie rods, side impact beam, propeller shafts, stem steering system etc. It provides feature such as corrosion resistance, high strength, environmental free, etc.
Stainless Steel Capillary Pipe is very small internal diameter. It is coiled to several turns so that it could occupy less space and it has a very long continuous length. T direct s used to control the flow of refrigerant. It also connects the remote bulb to the thermostatic expansion valve or vice versa.
SS Capillary Tube Seamless is designed to change the high pressure liquid refrigerant into a low pressure spray of refrigerant. Its pressure drop amount is dependent on the length and inside diameter of the tube.
Stainless Steel Capillary Tubing ,
304-grade stainless steel.
Precise precut lengths.
Clean and smooth surface finish.
Color coded for easy identification.
Tight tolerance: OD and ID +/-0.001″.
Whether you need to replace system tubing as part of your troubleshooting or want to reduce the dwell volume of your system as you move to narrower columns, Restek has the quality tubing in the lengths and IDs you need. Each ID is color coded, so it is easy to identify and replace correctly.
Tubing is precision cut, resulting in clean, square-cut ends without ovality.
ID: 0.005″ (0.127 mm)
Length: as per your requests
Material: stainless steel
Max Pressure: 27,850 psi OD: 1/16″
PHYSICAL PROPERTIES
Yield strength: ≥40,000 psi
Tensile strength: ≥70,000 psi
Maximum Hardness: 200HV
OD:0.125”-0.625”
Wall Thk : 0.025”-0.065”
Length:Max. 15000M/PCS
1. Material:
American Standard Material: TP304 TP304L TP304H TP321 TP321H TP316L TP316SS
TP316Ti TP347 TP347H TP317L TP309S TP310S 904L
Russian standard Material: 08X18H10 03X18H11 10X17H13M2T 03X17H13M2
12X18H10T 08X18H10T 08X18H12B
German standard material: 1.4301 1.4306 1.4541 1.4404 1.4571 1.4550
Japanese standard material: SUS304 SUS304L SUS321 SUS316L
SUS316Ti SUS347 SUS800 SUS840
Double-Grade Material: 304/304L 316/316L 321/321H 347/347H
Super duplex steel: 2205 2304 S31803 S32750
Inconel 600,Inconel 601,Inconel 625,Inconel 725,Incoloy 800,Incoloy 800H,Incoloy 800HT,
Incoloy 825,Incoloy 901,Incoloy 925Incoloy 926 Etc.
SS Capillary Tubing is the standard molybdenum bearing grade tube. It provides better corrosion resistant properties , especially higher resistance to pitting and crevice corrosion in chloride environments.
Stainless Steel Capillary Tubing For Hplc are components in both liquid and gas chromatography columns which are used for preparative and analytical processes across the fields of analytical and biochemistry.
STAINLESS STEEL CAPILLARY TUBING CHEMICAL COMPOSITION
The below table shows the chemical composition of the used for Stainless Steel Capillary Tube:
STAINLESS STEEL CAPILLARY TUBE GRADES UNS C Mn P S Si Cr Ni Mo Ti Nb N
TP304 S30400 0.08 2 0.045 0.03 1 18.0-20.0 8.0-11.0
TP304L S30403 0.035 2 0.045 0.03 1 18.0-20.0 8.0-13.0
TP316 S3160 0.08 2 0.045 0.03 1 16.0-18.0 11.0-14.0 2.0-3.0
TP316L S31603 0.035 2 0.045 0.03 1 16.0-18.0 10.0-14.0 2.0-3.0
STAINLESS STEEL CAPILLARY TUBING MECHANICAL PROPERTIES
Material Heat Temperure Tensile Strength Yield Strength Elongation %, Min
Treatment Min. Ksi (MPa), Min. Ksi (MPa), Min.
º F(º C)
TP304 Solution 1900 (1040) 75(515) 30(205) 35
TP304L Solution 1900 (1040) 70(485) 25(170) 35
TP316 Solution 1900(1040) 75(515) 30(205) 35
TP316L Solution 1900(1040) 70(485) 25(170) 35
SS CAPILLARY TUBE PRESSURE RATING
STAINLESS STEEL CAPILLARY TUBE PRESSURE RATING
OD(INCH) | WALL THICKNESS(INCH) | MIN TENSILE STRENGTH (PSI) | THEORETICAL BURST PRESSURE * (PSI) | WORKING PRESSURE (PSI) 25% OF BURST | THEORETICAL YIELD POINT ** (PSI) | COLLAPSE PRESSURE *** (PSI) | |
---|---|---|---|---|---|---|---|
0.250 | 0.020 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
0.250 | 0.028 | 30,000 | 75,000 | 21,649 | 5,412 | 8,660 | 5,967 |
0.250 | 0.035 | 30,000 | 75,000 | 29,167 | 7,292 | 11,667 | 7,224 |
0.250 | 0.049 | 30,000 | 75,000 | 48,355 | 12,089 | 19,342 | 9,455 |
0.250 | 0.065 | 30,000 | 75,000 | 81,250 | 20,313 | 32,500 | 11,544 |
0.375 | 0.020 | 30,000 | 75,000 | 8,955 | 2,239 | 3,582 | 3,029 |
0.375 | 0.028 | 30,000 | 75,000 | 13,166 | 3,292 | 5,266 | 4,145 |
0.375 | 0.035 | 30,000 | 75,000 | 17,213 | 4,303 | 6,885 | 5,077 |
0.375 | 0.049 | 30,000 | 75,000 | 26,534 | 6,634 | 10,614 | 6,816 |
0.375 | 0.065 | 30,000 | 75,000 | 39,796 | 9,949 | 15,918 | 8,597 |
0.500 | 0.020 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
0.500 | 0.028 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.500 | 0.035 | 30,000 | 75,000 | 12,209 | 3,052 | 4,884 | 3,906 |
0.500 | 0.049 | 30,000 | 75,000 | 18,284 | 4,571 | 7,313 | 5,304 |
0.500 | 0.065 | 30,000 | 75,000 | 26,351 | 6,588 | 10,541 | 6,786 |
0.500 | 0.083 | 30,000 | 75,000 | 37,275 | 9,319 | 14,910 | 8,307 |
0.625 | 0.020 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.625 | 0.028 | 30,000 | 75,000 | 7,381 | 1,845 | 2,953 | 2,568 |
0.625 | 0.035 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.625 | 0.049 | 30,000 | 75,000 | 13,947 | 3,487 | 5,579 | 4,335 |
0.625 | 0.065 | 30,000 | 75,000 | 19,697 | 4,924 | 7,879 | 5,591 |
0.625 | 0.083 | 30,000 | 75,000 | 27,124 | 6,781 | 10,850 | 6,910 |
0.625 | 0.095 | 30,000 | 75,000 | 32,759 | 8,190 | 13,103 | 7,734 |
0.625 | 0.109 | 30,000 | 75,000 | 40,172 | 10,043 | 16,069 | 8,639 |
0.750 | 0.028 | 30,000 | 75,000 | 6,052 | 1,513 | 2,421 | 2,156 |
0.750 | 0.035 | 30,000 | 75,000 | 7,721 | 1,930 | 3,088 | 2,669 |
0.750 | 0.049 | 30,000 | 75,000 | 11,273 | 2,818 | 4,509 | 3,664 |
0.750 | 0.065 | 30,000 | 75,000 | 15,726 | 3,931 | 6,290 | 4,749 |
0.750 | 0.083 | 30,000 | 75,000 | 21,318 | 5,330 | 8,527 | 5,905 |
0.750 | 0.095 | 30,000 | 75,000 | 25,446 | 6,362 | 10,179 | 6,637 |
0.750 | 0.109 | 30,000 | 75,000 | 30,733 | 7,683 | 12,293 | 7,453 |
0.750 | 0.120 | 30,000 | 75,000 | 35,294 | 8,824 | 14,118 | 8,064 |
0.875 | 0.020 | 30,000 | 75,000 | 3,593 | 898 | 1,437 | 1,340 |
0.875 | 0.028 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.875 | 0.035 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
0.049 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 | |
0.875 | 0.065 | 30,000 | 75,000 | 13,087 | 3,272 | 5,235 | 4,126 |
0.875 | 0.083 | 30,000 | 75,000 | 17,560 | 4,390 | 7,024 | 5,152 |
0.875 | 0.095 | 30,000 | 75,000 | 20,803 | 5,201 | 8,321 | 5,807 |
0.875 | 0.109 | 30,000 | 75,000 | 24,886 | 6,221 | 9,954 | 6,543 |
0.875 | 0.120 | 30,000 | 75,000 | 28,346 | 7,087 | 11,339 | 7,100 |
1.000 | 0.028 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.000 | 0.035 | 30,000 | 75,000 | 5,645 | 1,411 | 2,258 | 2,027 |
1.000 | 0.049 | 30,000 | 75,000 | 8,149 | 2,037 | 3,259 | 2,796 |
1.000 | 0.065 | 30,000 | 75,000 | 11,207 | 2,802 | 4,483 | 3,647 |
1.000 | 0.083 | 30,000 | 75,000 | 14,928 | 3,732 | 5,971 | 4,567 |
1.000 | 0.095 | 30,000 | 75,000 | 17,593 | 4,398 | 7,037 | 5,159 |
1.000 | 0.109 | 30,000 | 75,000 | 20,908 | 5,227 | 8,363 | 5,827 |
1.000 | 0.120 | 30,000 | 75,000 | 23,684 | 5,921 | 9,474 | 6,336 |
1.000 | 0.134 | 30,000 | 75,000 | 27,459 | 6,865 | 10,984 | 6,963 |
1.250 | 0.035 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.250 | 0.049 | 30,000 | 75,000 | 6,380 | 1,595 | 2,552 | 2,260 |
The quality of our products for the control line in oil and gas sector is assured not just during the controlled manufacturing process but also by way of finished product testing. Typical tests include:
Non-destructive tests
Hydrostatic tests
Surface finish controls
Dimensional accuracy measurements
Flare and coning tests
Mechanical and chemical property testing
STAINLESS STEEL CAPILLARY PIPE STOCK ALSO SEARCH FOR
316L grade Downhole Chemical Injection Tubing, Stainless steel Capillary Pipe trader,stainless steel Capillary Pipe astm,stainless steel capillary tubing cutter,hplc stainless steel capillary tubing,cutting stainless steel capillary tubing,stainless steel 1/16 in. capillary tubing, weight of stainless steel Capillary pipe per foot,weight of stainless steel Capillary pipe,stainless steel Capillary pipe for sale,stainless steel Capillary Tube weight per foot,Stainless Steel Capillary pipe Suppliers,stainless steel Capillary tubing grades,stainless steel Capillary pipe hs code,stainless steel Capillary pipeweight chart india,stainless steel Capillary tubing metric,stainless steel Capillary tubing properties,stainless steel Capillary pipe section properties, stainless steel Capillary Tube supplier in china, exporter of stainless steel Capillary pipe 304 stainless steel Capillary pipes, stainless steel Capillary pipes distributor, stainless steel Capillary Tube manufacturer in china, ss seamless Capillary Tube stockholder in China,Stainless Steel Capillary Tube Suppliers, seamless Capillary Pipe exporter.
3,Production standard:
China Standard : GB/T14975/14976/13296
American Standard: ASTM A269/A312/A213/A511/A789/A790
Japanese standard: JISG3459/3463
German standard: DIN17456/17458
European standard: EN10216-5
4. The range of applications: petroleum, chemical, pharmaceutical, food, machinery, aerospace, construction, military, hardware,gas boilers, plumbing devices, ships, power plants and other industr
Available Alloy Grades for Chemical Injection Line Tubing
Austenitic: S31603/316L, 304,304L
Duplex:
S31803/S32205
S32750
Nickel alloy:
N08825
N06625
For example:
1)Medical Acupuncture with Capillary Tubing,
2)High-pressure instrumentation with Capillary Tubing,
3)Coal exploration with a stainless steel capillary pipe coil
4)Thermostat with Capillary Tube
5)Beer machine with stainless steel Capillary Tube
6)Drinking water equipment with stainless steel Capillary Tubing
7)Danfoss expansion valve with stainless steel Capillary Tube
5. Specifications: 1. Outer diameter :1/16inch-2inch Tolerance:0.005mm-0.01mm
2. Wall thickness :0.08mm-2.0mm Tolerance :0.01mm-0.02mm
3. Single length :10mm-10,000mm
4. HV:150HV-450HV
Stainless Steel Capillary tube sizes |
||||
ITEM |
Grade |
Size |
Length |
Pressure (Mpa) |
1 |
316L 304L 304 625 825 2205 2507 |
1/16″×0.025″ |
3200 |
80
|
2 |
316L 304L 304 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
100
|
3 |
316L 304L 304 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
100
|
4 |
316L 304L 304 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
100
|
5 |
316L 304L 304 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
80
|
6 |
316L 304L 304 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
100
|
7 |
316L 304L 304 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
80
|
8 |
316L 304L 304 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
100
|
9 |
316L 304L 304 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
80
|
10 |
316L 304L 304 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
100
|
11 |
316L 304L 304 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
100
|
12 |
316L 304L 304 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
100
|
13 |
316L 304L 304 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
100
|
14 |
316L 304L 304 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
100
|
15 |
316L 304L 304 625 825 2205 2507 |
φ8mm×1mm |
1800 |
80
|
16 |
316L 304L 304 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
100
|
17 |
316L 304L 304 625 825 2205 2507 |
φ10mm×1mm |
1500 |
70
|
18 |
316L 304L 304 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
70
|
19 |
316L 304L 304 625 825 2205 2507 |
φ10mm×2mm |
500 |
100
|
20 |
316L 304L 304 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
80 |