Incoloy 825 Control Line (Coiled Tubing):
Note: special specifications, materials and length of products can be customized according to customer requirements
Chemical Composition alloy 825 Control Line
Element |
Content (%) |
Nickel, Ni |
38-46 |
Iron, Fe |
22 |
Chromium, Cr |
19.5-23.5 |
Molybdenum, Mo |
2.50-3.50 |
Copper, Cu |
1.50-3.0 |
Manganese, Mn |
1 |
Titanium, Ti |
0.60-1.20 |
Silicon, Si |
0.50 |
Aluminum, Al |
0.20 |
Carbon, C |
0.050 |
Sulfur, S |
0.030 |
Physical Properties
The physical properties of Incoloy/ alloy 825 Control Line are given in the following table.
Properties |
Metric |
Imperial |
Density |
8.14 g/cm³ |
0.294 lb/in³ |
Melting point |
1385°C |
2525°F |
Mechanical Properties
The mechanical properties of Incoloy/alloy 825 Control Line are highlighted in the following table.
Properties |
Metric |
Imperial |
Tensile strength (annealed) |
690 MPa |
100000 psi |
Yield strength (annealed) |
310 MPa |
45000 psi |
Elongation at break (annealed prior to test) |
45% |
45% |
Thermal Properties
The thermal properties of Incoloy/ alloy 825 are outlined in the following table.
Properties |
Metric |
Imperial |
|
Thermal expansion co-efficient (at 20-100°C/68-212°F) |
14 µm/m°C |
7.78 µin/in°F |
|
Thermal conductivity |
11.1 W/mK |
77 BTU in/hr.ft².°F |
Incoloy 825 0.125 in to 0.625 in Control Line Introductions:
◆Tube Body Load: Yield & Tensile Min‐imums calculated on Specified Wall.
◆Hydrostatic Test Pressure: All completed coiled tubing strings shall be hydrostat‐ic pressure tested prior to shipping. The hydrostatic test pressure shall be lesser of 90% of the theoretical burst yield strength or 17,500 psi or 120700 kpa (unless spe‐cifically agreed between purchaser and manufacturer).
◆Internal Yield: Internal Pressure to cause yielding using Minimum Yield Strength and Minimum Wall Thickness.
◆Maximum Working Pressure is a func‐tion of tube condition and is determined by the user.
◆Torque Values Calculated Using Minimum Wall Thickness and Minimum Yield Strength.
◆Other size/wall thickness available on request.
◆Above data is for new tubing at speci‐fied minimum strengths.
Incoloy825 Control Line MATERIAL SPECIFICATIONS and Pressure Rating:
Each type of Pressure for Stainless Steel Control Line :
Outside diameter, in. | Wall thickness, in. | Working pressure2) | Burst pressure2) | Collapse pressure4) | ||||||||||||
psi (MPa) | psi (MPa) | psi (MPa) | ||||||||||||||
1/4 | 0.035 | 6,600 (46) | 22,470 (155) | 6,600 (46) | ||||||||||||
1/4 | 0.049 | 9,260 (64) | 27,400 (189) | 8,710 (60) | ||||||||||||
1/4 | 0.065 | 12,280 (85) | 34,640 (239) | 10,750 (74) | ||||||||||||
3/8 | 0.035 | 4,410 (30) | 19,160 (132) | 4,610 (32) | ||||||||||||
3/8 | 0.049 | 6,170 (43) | 21,750 (150) | 6,220 (43) | ||||||||||||
3/8 | 0.065 | 8,190 (56) | 25,260 (174) | 7,900 (54) | ||||||||||||
3/8 | 0.083 | 10,450 (72) | 30,050 (207) | 9,570 (66) | ||||||||||||
1/2 | 0.049 | 4,630 (32) | 19,460 (134) | 4,820 (33) | ||||||||||||
1/2 | 0.065 | 6,140 (42) | 21,700 (150) | 6,200 (43) | ||||||||||||
1/2 | 0.083 | 7,840 (54) | 24,600 (170) | 7,620 (53) | ||||||||||||
5/8 | 0.049 | 3,700 (26) | 18,230 (126) | 3,930 (27) | ||||||||||||
5/8 | 0.065 | 4,900 (34) | 19,860 (137) | 5,090 (35) | ||||||||||||
5/8 | 0.083 | 6,270 (43) | 26,910 (151) | 6,310 (44) | ||||||||||||
3/4 | 0.049 | 3,080 (21) | 17,470 (120) | 3,320 (23) | ||||||||||||
3/4 | 0.065 | 4,090 (28) | 18,740 (129) | 4,310 (30) | ||||||||||||
3/4 | 0.083 | 5,220 (36) | 20,310 (140) | 5,380 (37) |
Standard Sizes of stainless steel Control Line
Stainless Steel Control Line Outside Diameter | 6.25MM-25.4mm |
Stainless Steel Control Line Thickness | 0.2mm – 2mm |
Stainless Steel Control Line Grades | TP – 304,304L,316,316L,201 ALLO 625 825 2205 ect |
Stainless Steel Seamless Control Line Specifications | ASTM A213 (average wall) and ASTM A269 |
Stainless Steel Welded Control Line Specifications | ASTM A249 and ASTM A269 |
We are offering Incoloy 825 Coiled Tubing /Control Line , We are Professional Stainless Steel Control Line Suppliers , including 304 Grdae Control Line , Incloy 825 Control Line, SS316 Control Line, 2205 Control Line and other Grades Control Line, Tubings , which are in small bore sizes and precise thickness are available as per the requirements of clients. . It & is widely used in instrumentation Industries. SS 304 capillary tubes and 316 Stainless Steel Coiled tubes are available in precise cut to lengths are also highly effective in a wide range of temperatures. Stainless steel 316 coiled tubing Control Line is generally used for high pressure applications. Our Incloy 825 Seamless Control Lines are mostly used for Hydraulic control lines, Liquid/ Gas Transportation Lines, Medical devices and equipment’s, Chromatography applications, Measurement devices, Remote thermometer systems Small precision stainless steel antenna, Watches, Car antenna tube, Laser engraving equipment etc. As a largest stockholder of SS Coiled Tubings/SS Capillary Tubings /Control Lines includes grades stainless Steel 304 Capillary Pipe, Stainless Steel 304L Capillary Pipe, Stainless Steel 316 Coiled Tubing, Stainless steel 316L Capillary tubing and Duplex 2205 Capillary Pipe , Inconel 625 Control Line,Incoloy 825 Coiled seamless tubes and Incoloy 825 welding Coiled Tubings, those are used in various indutsrial applications.
Key words: Incoloy 825 Capillary tubing, Incoloy825 seamless Coiled tube, Incoloy825 Coiled tubing, Incoloy 825 Control Line, Incoloy825 Capillary Coiled tubing, Stainless Steel Capillary Tubing, 316L capillary pipe, 304 Stainless steel Control Line, Stainless Steel coiled tubing, Steel rolled pipe, Hydraulic Control Line, stainless steel chemical injection line,Exporters Of Glass Capillary Tube, Stainless Steel Capillary Tube Material Distributors, Dealers Of 304 Stainless Steel Capillary Tube, Huge Stock Of SS Coiled Tubing, Stainless Steel Flexible Coiled Tubing Wholesalers.EXPORTERS OF SS 304 Coiled tubing, AVAILABLE STAINLESS STEEL 1/4 IN. CAPILLARY TUBING, HIGH-QUALITY OF incoloy 825 HYDRAULIC CONTROL LINE, HPLC STAINLESS STEEL CONTROL LINE SUPPLIERS, MANUFACTURERS OF HYDRAULIC CONTROL LINES .
Application: Stainless Steel Control Lines also called round tubing, a roll of Stainless Steel coiled tubing thousands of meters long. SS Control Lines Can replace the conventional tubing for a lot of homework, Stainless Steel coiled tubing equipment has the characteristics of the belt under the pressure operation, continuous, equipment is small in size, operating cycle fast, low cost. The SS Control Lines widely used in oil and gas field repair, drilling, completion, logging and other operations plays an increasingly important role in oil and gas exploration and development.Sometimes we can leave at least 30-50cm pipes ends for chemical fufilled. The Stainless Steel Control Lines are used in various critical applications with having an inner surface free from oil, grease and dust particles, This Small sizes precision tubes’ tolerances and thickness as per the requirements by clients.
Standard Stainless Hydraulic Control Line Pressure Rating and Length:
Stainless Steel Hydraulic Control Line |
||||
ITEM |
Grade |
Size |
Length |
Pressure (Mpa) |
1 |
316L 304L 304 625 825 2205 2507 |
1/8″×0.025″ |
3200 |
80
|
2 |
316L 304L 304 625 825 2205 2507 |
1/8″×0.035″ |
3200 |
100
|
3 |
316L 304L 304 625 825 2205 2507 |
1/4″×0.035″ |
2000 |
100
|
4 |
316L 304L 304 625 825 2205 2507 |
1/4″×0.049″ |
2000 |
100
|
5 |
316L 304L 304 625 825 2205 2507 |
3/8″×0.035″ |
1500 |
80
|
6 |
316L 304L 304 625 825 2205 2507 |
3/8″×0.049″ |
1500 |
100
|
7 |
316L 304L 304 625 825 2205 2507 |
1/2″×0.049″ |
1000 |
80
|
8 |
316L 304L 304 625 825 2205 2507 |
1/2″×0.065″ |
1000 |
100
|
9 |
316L 304L 304 625 825 2205 2507 |
φ3mm×0.7mm |
3200 |
80
|
10 |
316L 304L 304 625 825 2205 2507 |
φ3mm×0.9mm |
3200 |
100
|
11 |
316L 304L 304 625 825 2205 2507 |
φ4mm×0.9mm |
3000 |
100
|
12 |
316L 304L 304 625 825 2205 2507 |
φ4mm×1.1mm |
3000 |
100
|
13 |
316L 304L 304 625 825 2205 2507 |
φ6mm×0.9mm |
2000 |
100
|
14 |
316L 304L 304 625 825 2205 2507 |
φ6mm×1.1mm |
2000 |
100
|
15 |
316L 304L 304 625 825 2205 2507 |
φ8mm×1mm |
1800 |
80
|
16 |
316L 304L 304 625 825 2205 2507 |
φ8mm×1.2mm |
1800 |
100
|
17 |
316L 304L 304 625 825 2205 2507 |
φ10mm×1mm |
1500 |
70
|
18 |
316L 304L 304 625 825 2205 2507 |
φ10mm×1.2mm |
1500 |
70
|
19 |
316L 304L 304 625 825 2205 2507 |
φ10mm×2mm |
500 |
100
|
20 |
316L 304L 304 625 825 2205 2507 |
φ12mm×1.5mm |
500 |
80 |
Standard Stainless Steel Hydraulic Control Line Short Descriptions:
Thickness | 0.1 to 2.0mm, |
Brand | Imported |
Material Grade | 304,304L,316,316L,321,316Ti,Duplex 2205,Monel400,Inconel 625,Inconel 825 |
Diameter | 1/8inch to 5/8inch OD, expecially 1/4inch, 3/8 inch used largely.
Stock size: 6.35mm*1.24mm ,8*0.5mm ,8*0.6mm,8*0.8mm, 8*0.9mm,8*1mm, 9.53*1.24mm,10*1mm,ect.. |
Shape | Round |
Unit Pipe Length | we can produce at least 8000feet-10,000 feet per Length,
Also the Length can be customised by clients, |
Range | All sizes and length available |
Size | As per the requirment |
Surface | Bright annealed, Polished |
Pipe Fluid | Chemical, Water, Gas,Oil |
STAINLESS STEEL CONTROL LINE CHEMICAL COMPOSITION
The below table shows the chemical composition of the used for Stainless Steel Control Line:
STAINLESS STEEL CONTROL LINE GRADES | UNS | C | Mn | P | S | Si | Cr | Ni | Mo | Ti | Nb | N |
TP304 | S30400 | 0.08 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-11.0 | ||||
TP304L | S30403 | 0.035 | 2 | 0.045 | 0.03 | 1 | 18.0-20.0 | 8.0-13.0 | ||||
TP316 | S3160 | 0.08 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 11.0-14.0 | 2.0-3.0 | |||
TP316L | S31603 | 0.035 | 2 | 0.045 | 0.03 | 1 | 16.0-18.0 | 10.0-14.0 | 2.0-3.0 |
STAINLESS STEEL CONTROL LINE MECHANICAL PROPERTIES
Material | Heat | Temperure | Tensile Strength | Yield Strength | Elongation %, Min |
Treatment | Min. | Ksi (MPa), Min. | Ksi (MPa), Min. | ||
º F(º C) | |||||
TP304 | Solution | 1900 (1040) | 75(515) | 30(205) | 35 |
TP304L | Solution | 1900 (1040) | 70(485) | 25(170) | 35 |
TP316 | Solution | 1900(1040) | 75(515) | 30(205) | 35 |
TP316L | Solution | 1900(1040) | 70(485) | 25(170) | 35 |
STAINLESS STEEL CONTROL LINE EQUIVALENT GRADES
GRADE | UNS NO | DIN/WERKSTOFF |
Stainless Steel Control Line 304 | S30400 | 1.4301 |
Stainless Steel Control Line 304L | S30403 | 1.4306 |
Stainless Steel Control Line 316 | S31600 | 1.4436 |
Stainless Steel Control Line 316L | S31603 | 1.4404 |
SS HYDRAULIC CONTROL LINE PRESSURE RATING
OD
(INCH) |
WALL THICKNESS
(INCH) |
MIN TENSILE STRENGTH (PSI) | THEORETICAL BURST PRESSURE * (PSI) | WORKING PRESSURE (PSI) 25% OF BURST | THEORETICAL YIELD POINT ** (PSI) | COLLAPSE PRESSURE *** (PSI) | |
0.250 | 0.020 | 30,000 | 75,000 | 14,286 | 3,571 | 5,714 | 4,416 |
0.250 | 0.028 | 30,000 | 75,000 | 21,649 | 5,412 | 8,660 | 5,967 |
0.250 | 0.035 | 30,000 | 75,000 | 29,167 | 7,292 | 11,667 | 7,224 |
0.250 | 0.049 | 30,000 | 75,000 | 48,355 | 12,089 | 19,342 | 9,455 |
0.250 | 0.065 | 30,000 | 75,000 | 81,250 | 20,313 | 32,500 | 11,544 |
0.375 | 0.020 | 30,000 | 75,000 | 8,955 | 2,239 | 3,582 | 3,029 |
0.375 | 0.028 | 30,000 | 75,000 | 13,166 | 3,292 | 5,266 | 4,145 |
0.375 | 0.035 | 30,000 | 75,000 | 17,213 | 4,303 | 6,885 | 5,077 |
0.375 | 0.049 | 30,000 | 75,000 | 26,534 | 6,634 | 10,614 | 6,816 |
0.375 | 0.065 | 30,000 | 75,000 | 39,796 | 9,949 | 15,918 | 8,597 |
0.500 | 0.020 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
0.500 | 0.028 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.500 | 0.035 | 30,000 | 75,000 | 12,209 | 3,052 | 4,884 | 3,906 |
0.500 | 0.049 | 30,000 | 75,000 | 18,284 | 4,571 | 7,313 | 5,304 |
0.500 | 0.065 | 30,000 | 75,000 | 26,351 | 6,588 | 10,541 | 6,786 |
0.500 | 0.083 | 30,000 | 75,000 | 37,275 | 9,319 | 14,910 | 8,307 |
0.625 | 0.020 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.625 | 0.028 | 30,000 | 75,000 | 7,381 | 1,845 | 2,953 | 2,568 |
0.625 | 0.035 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 |
0.625 | 0.049 | 30,000 | 75,000 | 13,947 | 3,487 | 5,579 | 4,335 |
0.625 | 0.065 | 30,000 | 75,000 | 19,697 | 4,924 | 7,879 | 5,591 |
0.625 | 0.083 | 30,000 | 75,000 | 27,124 | 6,781 | 10,850 | 6,910 |
0.625 | 0.095 | 30,000 | 75,000 | 32,759 | 8,190 | 13,103 | 7,734 |
0.625 | 0.109 | 30,000 | 75,000 | 40,172 | 10,043 | 16,069 | 8,639 |
0.750 | 0.028 | 30,000 | 75,000 | 6,052 | 1,513 | 2,421 | 2,156 |
0.750 | 0.035 | 30,000 | 75,000 | 7,721 | 1,930 | 3,088 | 2,669 |
0.750 | 0.049 | 30,000 | 75,000 | 11,273 | 2,818 | 4,509 | 3,664 |
0.750 | 0.065 | 30,000 | 75,000 | 15,726 | 3,931 | 6,290 | 4,749 |
0.750 | 0.083 | 30,000 | 75,000 | 21,318 | 5,330 | 8,527 | 5,905 |
0.750 | 0.095 | 30,000 | 75,000 | 25,446 | 6,362 | 10,179 | 6,637 |
0.750 | 0.109 | 30,000 | 75,000 | 30,733 | 7,683 | 12,293 | 7,453 |
0.750 | 0.120 | 30,000 | 75,000 | 35,294 | 8,824 | 14,118 | 8,064 |
0.875 | 0.020 | 30,000 | 75,000 | 3,593 | 898 | 1,437 | 1,340 |
0.875 | 0.028 | 30,000 | 75,000 | 5,128 | 1,282 | 2,051 | 1,859 |
0.875 | 0.035 | 30,000 | 75,000 | 6,522 | 1,630 | 2,609 | 2,304 |
0.049 | 30,000 | 75,000 | 9,459 | 2,365 | 3,784 | 3,172 | |
0.875 | 0.065 | 30,000 | 75,000 | 13,087 | 3,272 | 5,235 | 4,126 |
0.875 | 0.083 | 30,000 | 75,000 | 17,560 | 4,390 | 7,024 | 5,152 |
0.875 | 0.095 | 30,000 | 75,000 | 20,803 | 5,201 | 8,321 | 5,807 |
0.875 | 0.109 | 30,000 | 75,000 | 24,886 | 6,221 | 9,954 | 6,543 |
0.875 | 0.120 | 30,000 | 75,000 | 28,346 | 7,087 | 11,339 | 7,100 |
1.000 | 0.028 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.000 | 0.035 | 30,000 | 75,000 | 5,645 | 1,411 | 2,258 | 2,027 |
1.000 | 0.049 | 30,000 | 75,000 | 8,149 | 2,037 | 3,259 | 2,796 |
1.000 | 0.065 | 30,000 | 75,000 | 11,207 | 2,802 | 4,483 | 3,647 |
1.000 | 0.083 | 30,000 | 75,000 | 14,928 | 3,732 | 5,971 | 4,567 |
1.000 | 0.095 | 30,000 | 75,000 | 17,593 | 4,398 | 7,037 | 5,159 |
1.000 | 0.109 | 30,000 | 75,000 | 20,908 | 5,227 | 8,363 | 5,827 |
1.000 | 0.120 | 30,000 | 75,000 | 23,684 | 5,921 | 9,474 | 6,336 |
1.000 | 0.134 | 30,000 | 75,000 | 27,459 | 6,865 | 10,984 | 6,963 |
1.250 | 0.035 | 30,000 | 75,000 | 4,449 | 1,112 | 1,780 | 1,633 |
1.250 | 0.049 | 30,000 | 75,000 | 6,380 | 1,595 | 2,552 | 2,260 |
STAINLESS STEEL CONTROL LINE STOCK ALSO SEARCH FOR
Stainless steel Control Line trader, stainless steel Control line astm,stainless steel coiled tubing cutter,hplc stainless steel coiled tubing,cutting stainless steel coiled tubing,stainless steel 1/4 in. capillary tubing, weight of stainless steel Control Line per foot,weight of stainless steel Capillary coiled Pipe,stainless steel Control Line for sale,stainless steel Capillary Coiled Pipe weight per foot,Stainless Steel Coiled Tubing Suppliers,stainless steel Coiled tubing grades,stainless steel Capillary Coiled Tubing hs code,stainless steel Capillary Pipe weight chart China,stainless steel Control Line metric,stainless steel Capillary Coiled tubing properties,stainless steel Control Line properties, stainless steel Control Line supplier in china, exporter of stainless steel Control Line, stainless steel Coiled Pipes, stainless steel Control Line distributor, stainless steel Control Line manufacturer in china, ss seamless Control Line stockholder in china,Stainless Steel Control Line Suppliers, seamless Control Line exporter.
The Range of Incoloy 825 Hydraulic Control Line .
Schedule 9.52mm Type alloy 825 Capillary Tubing | Schedule 9.52*1.24mm alloy 825 coiled Tubing |
ASTM 5564 1/8” alloy 825 Hydraulic Control Line | Polished Alloy 825 Coiled Tubing |
Incoloy 825 Seamless Coiled Tubing | SUS alloy 825 Welded Coiled Tubing |
JIS SUS alloy 825 Seamless Capillary Tubing | alloy 825 Hydraulic Control Line |
Alloy 825 Control Line for oil and Gas | AMTM alloy 825 Seamless Control Line |
ASTM A312 alloy 825 Coiled Tubing Factory | Stainless Steel Inox alloy 825 Capillary Coiled Tubing |
ASTM A312 Gr alloy 825 Control Line | AMS 5566 alloy 825 High Pressure Control Line |
SA213 alloy 825 Control Line | alloy 825 Control Line Polished |
ASTM A312 alloy 825 Elliptical and Oval Tubes | AMS 5567 alloy 825 Seamless steel coiled Tubing |
ASTM A213 alloy 825 welded Capillary Tubing | AMS 5563 alloy 825 1/4” *0049”Seamless Control Line |
ASTM A269 alloy 825 straight tube boiler | AMS 5563 alloy 825 Welded furnace tube |
ASTM A249 alloy 825 Hydraulic Control Line | AMS 5564 alloy 825 1/8” Welded Tubing, High-Pressure Hydraulic |
UNS alloy 825 Pitot Tube stockist | Stainless Steel alloy 825 Control Line |
ASTM A358 alloy825 Polished Tubing | alloy 825 Stainless Steel Ornamental Tube |
Stainless Steel alloy825 Exhaust Pipe | alloy 825 Stainless Steel Coiled Tubing |
ASME SA213 alloy825 Coiled Tubing Control Line | WERKSTOFF NR. 1.4301 Alloy 825 Flexible Tubing |
SA 688 alloy825 Welded Capillary Tubing | SS alloy825 seamless steel coiled Tube |
Din 1.4301 AISI alloy825 Perforated Exhaust Tube | Stainless Steel alloy825 Hypodermic Tubing |
Din W.-Nr. 1.4301 Aisi alloy825 Corrugated Tube | SS alloy 825 Precision Tubing |
Material 1.4301 Aisi alloy825 Slotted Handrail Tube | Incoloy 825 0.049inch Thickness Capillary Tubing |
ASTM alloy825 3/8”*0.035” stainless steel coiled tube | Alloy825 6.35mm*1.24mm Capillary tubing |
Stainless Steel alloy825 Ornamental Pipe | Stainless Steel alloy825 Fin Tube / Finned Tube |
Salloy 825Stainless Steel U Shaped Tube | Alloy825 Stainless Steel Polished Control Line |
Din 1.4301 825 Material Vacuum Tube | ASTM alloy825 6.35*1.24 stainless steel coiled tubing |
Alloy825 Stainless Steel Hydraulic Control Line | Alloy825 Stainless Steel Hypodermic Tubing for Medical Needle |
Ultra-High Purity Electropolished Stainless Steel alloy825 Capillary tubing | 1/4inch*0.049inch incoloy 825 Coiled Tubing |
Din 1.4301 alloy825 Stainless Steel Annealed Tubing | Alloy825 Stainless Steel Coil Tubing Heat Exchanger |
SAE J405 Uns alloy825 Thin Wall Tubing | Alloy825 Stainless Steel Long rolled Tubing |
Alloy825 Stainless Steel Seamless Control Line | Large Diameter alloy825 Coiled Tubing |
Alloy825 Stainless Steel Lined Pipe | Corrugated alloy825 Stainless Steel Tube for Gas and oil |
ASTM A269 alloy825 stainless steel coiled tubing | Alloy825 Stainless Steel Bending Tubing |
Alloy825 9.52*1.24MM Coiled Tubing | Alloy825 Stainless Steel Rolled Tubing |
High-pressure Incoloy 825 Stainless Steel Hydraulic Control Line | Incoloy 825 Control Line |
Jis Alloy 825 Coiled Tubing | Incoloy 825 Long meter Coiled Tubing |