Key words: 201 Stainless Steel Tube, 201 Stainless Steel Tubing & 201 Stainless Steel Pipe Manufacturer & Supplier,201 Stainless Steel Seamless Tube, 201 Stainless Steel welded Tube, 201 Stainless Steel Seamless Pipe, 201 Stainless Steel welded Pipe, 201 Stainless Steel Seamless Tubing, 201 Stainless Steel welded Tubing, 201 Stainless Steel Instrumentation Tubes Supplier, SS 201 Welded Tube, ASTM A312 TP 201 Stainless Steel Pipes, ASTM A312 TP 201 Stainless Steel Tube , SS 201 Tubing Bends, Hot finished seamless SS 201 tubing, SS 201 Capillary tube, SS 201 heater tubes, Cold drawn seamless SS 201 tubing, SS 201 Electric resistance welded Pipe, 201 Stainless Steel ERW Pipe, SS 201 Drawn over mandrel (DOM) manufacturer, supplier.
We are leading manufacturer, exporter & supplier of 201 Stainless Steel Seamless Pipes & Tubes ,we also also stock a wide range of Stainless Steel Pipes, Stainless Steel tube, 201 Stainless Steel Tubing, 201 Stainless Steel Seamless Tube, 201 Stainless Steel Welded Tube, SS 201 Tubing Bends, SS 201 Capillary tube, SS 201 heater tubes, other stainless steel pipe and grades also available in ready stock including SS 304 seamless tubeSS 304L welded tube, SS 316 seamless tube, SS 316L welded pipe, SS 317L seamless pipe, SS 904L tubing, SS 310 seamless tube, SS 316Ti seamless tube, stainless steel 347H seamless tube, S31803 Duplex Steel tube, S32205 Duplex Steel welded pipe and S32750 Super Duplex Steel seamless tubestandard lengths, but can be cut to size as per customer’s requirement.
201 Grade Stainless Steel Pipe’s Short Descriptions
| Stainless Steel Pipe 201 Grade descriptions: |
| 201 Stainless Steel Pipe |
| 1/2 inch NB to 48 inch NB |
| Single Random, Double Random & Required Length |
| Plain End, Beveled End, Threaded |
| 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS |
| Round Pipes/Tubes, Square Pipes/Tubes, Rectangular Pipe/Tubes, Coiled Tubes, “U” Shape, Pan Cake Coils, Hydraulic Tubes etc |
| 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements |
| Seamless / ERW / Welded / Fabricated / CDW |
| STAINLESS STEEL TUBING, SS SEAMLESS TUBING SPECIFICATION | |
| Specification | ASTM A213, ASTM A249, ASTM A268, ASTM A269, ASTM A270 & Its equivalent ASME, DIN & EN Standard. |
| Grades | 201, 202, 304 304H, 304LN, 309S, 310S, 316, 316L, 316H, 316Ti, 317, 317L, 321, 321H, 347, 347H, 410,446 |
| Type | Seamless / Welded |
| Diameter Size | 1/4” OD, NB to 3” OD, NB sizes |
| Thickness | 1mm to 12mm, SCH 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S as per ANSI B36.19/36.10 |
| Length | Up to 6 meters, custom cut lengths |
| Ends | No.1 Pickled Finish, No.4 finish, BA Finish, Electropolished Seamless Tubings |
| Delivery Conditions | As Rolled, Formed, Stress Relieved, Annealed, Hardened, Tempered, Cold Draw |
| Coating | Electropolish, Mechanical Polish, Satin Finish, Passivated |
| Testing | Product Analysis, Transverse Tension Test, Flattening Test, Etching Test, Radiographic Examination, Stabilizing Heat Treatment, Intergranular Corrosion Test, Weld Decay Test, Magnetic Particle Detection, Grain Size Test, NACE 0175, Dual Grade, PWHT (POST WELD HEAT TREATMENT), Flare Test, Bend Test, Hardness Test, Tensile Test etc |
| Dimension | All Stainless Steel Tubings are Manufactured and Inspected / Tested to the Relevant standards including ASTM and ASME |
| Value Added Services | Draw / Expansion / Machining / Sand Blasting / Shot Blasting / Heat Treatment |
| Packaging | Loose / Bundle / Wooden Pallet / Wooden Box / Plastic Cloth Wraps / Plastic End Caps / Beveled Protector |
| Material Test Certificate | Manufacturer Test Certificate As Per EN10204 3.1, 3.2 / Laboratory Test Certificate From NABL Approved Lab. / Under Third Party Inspection Agency Like SGS, TUV, DNV, LLOYDS, ABS ETC |
Chemical Compositions:
Welded And Seamless Stainless Steel Pipe Dimensions
| NPS | Outside Diameter | Nominal Wall Thickness | ||||||||
| Designator | in. | mm | Schedule 5S | Schedule 10S | Schedule 40S | Schedule 80S | ||||
| in. | mm | in. | mm | in. | mm | in. | mm | |||
| 1/8 | 0.41 | 10.29 | … | … | 0.049 | 1.24 | 0.068 | 1.73 | 0.095 | 2.41 |
| 1/4 | 0.54 | 13.72 | … | … | 0.065 | 1.65 | 0.088 | 2.24 | 0.119 | 3.02 |
| 3/8 | 0.68 | 17.15 | … | … | 0.065 | 1.65 | 0.091 | 2.31 | 0.126 | 3.2 |
| 1/2 | 0.84 | 21.34 | 0.065 | 1.65 | 0.083 | 2.11 | 0.109 | 2.77 | 0.147 | 3.73 |
| 3/4 | 4.05 | 26.67 | 0.065 | 1.65 | 0.083 | 2.11 | 0.113 | 2.87 | 0.154 | 3.91 |
| 1 | 1.32 | 33.4 | 0.065 | 1.65 | 0.109 | 2.77 | 0.133 | 3.38 | 0.179 | 4.55 |
| 1 1/4 | 1.66 | 42.16 | 0.065 | 1.65 | 0.109 | 2.77 | 0.14 | 3.56 | 0.191 | 4.85 |
| 1 1/2 | 1.90 | 48.26 | 0.065 | 1.65 | 0.109 | 2.77 | 0.145 | 3.68 | 0.2 | 5.08 |
| 2 | 2.38 | 60.33 | 0.065 | 1.65 | 0.109 | 2.77 | 0.154 | 3.91 | 0.218 | 5.54 |
| 2 1/2 | 2.88 | 73.03 | 0.083 | 2.11 | 0.12 | 3.05 | 0.203 | 5.16 | 0.276 | 7.01 |
| 3 | 3.50 | 88.9 | 0.083 | 2.11 | 0.12 | 3.05 | 0.1216 | 5.49 | 0.3 | 7.62 |
| 3 1/2 | 4.00 | 101.6 | 0.083 | 2.11 | 0.12 | 3.05 | 0.226 | 5.74 | 0.318 | 8.08 |
| 4 | 4.50 | 114.3 | 0.083 | 2.11 | 0.12 | 3.05 | 0.237 | 6.02 | 0.337 | 8.56 |
| 5 | 5.56 | 141.3 | 0.10*9 | 2.77 | 0.134 | 3.4 | 0.258 | 6.55 | 0.375 | 9.52 |
| 6 | 6.63 | 168.28 | 0.10*9 | 2.77 | 0.134 | 3.4 | 0.28 | 7.11 | 0.432 | 10.97 |
| 8 | 8.63 | 219.08 | 0.109 | 2.77 | 0.148 | 3.76 | 0.322 | 8.18 | 0.5 | 12.7 |
| 10 | 10.75 | 273.05 | 0.134 | 3.4 | 0.165 | 4.19 | 0.365 | 9.27 | 0.5 | 12.7 |
| 12 | 12.75 | 323.85 | 0.156 | 3.96 | 0.18 | 4.57 | 0.375 | 9.52 | 0.5 | 12.7 |
| 14 | 14.00 | 355.6 | 0.156 | 3.96 | 0.188 | 4.78 | … | … | … | … |
| 16 | 16.00 | 406.4 | 0.165 | 4.19 | 0.188 | 4.78 | … | … | … | … |
| 18 | 18.00 | 457.2 | 0.165 | 4.19 | 0.188 | 4.78 | … | … | … | … |
| 20 | 20.00 | 508 | 0.188 | 4.78 | 0.188 | 4.78 | … | … | … | … |
| 22 | 22.00 | 558.8 | 0.188 | 4.78 | 0.218 | 5.54 | … | … | … | … |
| 24 | 24.00 | 609.6 | 0.218 | 5.54 | 0.25 | 6.35 | … | … | … | … |
| 30 | 30.00 | 762 | 0.25 | 6.35 | 0.312 | 7.92 | … | … | … | |
Diameter Tolerance
| NPS | OD Tolerance | |||
| + | – | |||
| inch | mm | inch | mm | |
| 1/8~1 1 /2 > 1 1 /2~4 > 4~8 > 8~18 > 18~26 > 26~34 > 34~48 |
1/64(0.015) 1/32(0.031) 1/16(0.062) 3/32(0.093) 1/8(0.125) 5/32(0.156) 3/16(0.187) |
0.4 0.8 1.6 2.4 3.2 4.0 4.8 |
1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) 1/32(0.031) |
0.8 0.8 0.8 0.8 0.8 0.8 0.8 |
Wall Thickness Tolerance
| NPS | Tolerance, % | |
| + | – | |
| 1/8-2 1 /2 | 20.0 | 12.5 |
| 3~18, t/D≤ 5% | 22.5 | 12.5 |
| 3~18, t/D> 5% | 15.0 | 12.5 |
| ≥ 20, welded | 17.5 | 12.5 |
| ≥ 20, seamless, t/D≤ 5% | 22.5 | 12.5 |
| ≥ 20, seamless, t/D> 5% | 15.0 | 12.5 |
Hot-Finished Round Tube Permissible Variations:
These tolerances apply to cut lengths up to an including 24 Ft. (7.3M). For lengths over 24Ft. an additional over tolerance of 1/8in (3.1mm) for each 10ft. (3m) or fraction thereof shall be permissible up to a maximum tolerance of 1/2 in. (12.7mm)
| Specified Dimension, Outside Diameter | Ratio of Wall Thickness to Outside Diameter | Outside Diameter | Up To 0.109 | 0.109 to 0.172 | Over 0.172 to 0.203 | Over 0.203 | Permissible Variations In Cut Length | ||||||
| Over | Under | Over | Under | Over | Under | Over | Under | Over | Under | Over | Under | ||
| up to 3″ | All Thickness | 0.023 | 0.023 | 16.5 | 16.5 | 15 | 15 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 |
| 3″ to > 5.5″ | All Thickness | 0.031 | 0.031 | 16.5 | 16.5 | 15 | 15 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 |
| 5.5″ to > 8″ | All Thickness | 0.047 | 0.047 | 14 | 14 | 12.5 | 12.5 | 3/16 | 0 | ||||
| 8″ to > 10.75″ | 5% and Over | 0.047 | 0.047 | 12.5 | 12.5 | 3/16 | 0 | ||||||
| 10.75″ to > 12.75″ | Under 5% | 0.063 | 0.063 | 12.5 | 12.5 | 3/16 | 0 | ||||||
Cold Finished Stainless Steel Round Tube Permissible Variations:
| Outside Diameter, In. | Outside Diameter Tolerance, In. Over and Under | Ovality Double Outside Diameter Tolerance when wall is: | Wall Thickness in % | Permissible Variations in Cut Length, in. | ||
| Over | Under | Over | Under | |||
| Under 1/2 | 0.005 | Less than 0.015 In. | 15 | 15 | 1/8 | 0 |
| 1/2 to 1-1/2 Exceed | 0.005 | Less than 0.065 In. | 10 | 10 | 1/8 | 0 |
| 1 1/2 to 3 1/2, Exceed | 0.010 | Less Than 0.095 In. | 10 | 10 | 3/16 | 0 |
| 3 1/2 to 5 1/2 Exceed | 0.015 | Less than 0.150 In. | 10 | 10 | 3/16 | 0 |
| 5 1/2 to 8 Exceed. | 0.030 | Less than 0.240 In. | 10 | 10 | 3/16 | 0 |
| 8 to 8 5/8 Exceed | 0.045 | Less than 0.300 In. | 10 | 10 | 3/16 | 0 |
| 8 5/8 to 12 3/4 | 0.062 | Less than 0.350 In. | 10 | 10 | 3/16 | 0 |
These ss Round Tubes are sold to a wide range of industries/markets, due to their overall corrosion resistance and good machinability:
- SS Round Tube for Chemical and petrochemical
- Stainless Steel Round Tube used for Power generation
- SS Round Tube for Renewable energy
- Stainless Steel Round Tube for Pulp and Paper
- SS Round Tube for Process piping
- Stainless Steel Round Pipe applications for Food and beverage
- SS Round Tube used for Oil and gas
- Stainless Steel Round Tube applications in Mining
- SS Round Tube used for Water/waste
- Stainless Steel Round Tube application for Marine Industry
AVAILABLE SS PIPE STOCKIST IN CHINA, SS SEAMLESS PIPE
| Stainless Steel Seamless Round Pipe Supplier in China | SS Seamless Cold Drawn Pipe Supplier in China |
| Seamless Stainless Steel Bright Annealed Pipe Supplier in China | Stainless Steel Seamless Square Pipe Supplier in China |
| Stainless Steel Oval Pipe Supplier in China | Stainless Steel Hollow Pipe Exporter in China |
| Stainless Steel Seamless Electropolished Pipe in China | ASTM A312 TP304 Seamless Stainless Steel Pipe Supplier in China |
| Seamless Stainless Steel Ornamental Pipe in China | SS Seamless Color Coated Pipe Manufacturer in China |
| Stainless Steel Hexagonal Pipes Supplier in China | Stainless Steel Exhaust Pipe in China |
| Stainless Steel High Pressure Pipe in china | Stainless Steel Half Pipe in China |
| Hot Rolled seamless stainless steel pipe supplier in China | 1/2″ NB in Thickness Schedule Seamless Stainless Steel Pipein China |
| 5″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier China | Schedule 40 SS Pipes Supplier inChina |
| 6″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Schedule 80 SS Pipes Stocklist in China |
| 7″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Schedule 10 SS Pipes Exporters China |
| 8″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Sch 5 Stainless Steel Pipe Supplier in China |
| 14″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Stainless Steel Seamless Pipe Sizes per meter in China |
| 16″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Seamless Stainless Steel Pipe Per Foot in China |
| 18″ NB in Thickness Schedule Seamless Stainless Steel Pipe Supplier in China | Cold Rolled Seamless Stainless Steel Pipe Supplier in China |
STAINLESS STEEL ROUND TUBE DIMENSIONS, WEIGHT CHART
| Sizes & Weights per foot | ||||||||
STAINLESS STEEL ROUND PIPE 201/ 304/304L /316/ 316L |
||||||||
| Gauge | 18 | 16 | 14 | 11 | 9 | 7 | ||
| Inches | 0.049 | 0.065 | 0.083 | 0.120 | 0.148 | 0.180 | ||
| 1/2 | 0.23 | 0.30 | ||||||
| 5/8 | 0.30 | 0.39 | 0.48 | |||||
| 3/4 | 0.37 | 0.48 | 0.59 | |||||
| 7/8 | 0.43 | 0.56 | 0.70 | |||||
| 1 | 0.49 | 0.65 | 0.81 | 1.13 | ||||
| 1.050 | 0.52 | 0.68 | 0.86 | 1.23 | ||||
| 1-1/8 | 0.56 | 0.74 | 0.92 | 1.29 | ||||
| 1-1/4 | 0.63 | 0.83 | 1.03 | 1.45 | ||||
| 1-5/16 | 0.88 | 1.09 | 1.53 | |||||
| 1-3/8 | 0.69 | 0.91 | 1.15 | 1.61 | ||||
| 1-1/2 | 0.76 | 0.99 | 1.25 | 1.77 | ||||
| 1-5/8 | 0.82 | 1.08 | 1.37 | 1.93 | ||||
| 1.660 | 1.12 | 1.40 | 1.99 | 2.29 | ||||
| 1-3/4 | 0.89 | 1.17 | 1.48 | 2.09 | ||||
| 1.900 | 0.97 | 1.27 | 1.61 | 2.26 | 2.72 | |||
| 2 | 1.02 | 1.34 | 1.70 | 2.41 | ||||
| 2-1/4 | 1.49 | 1.88 | 2.66 | |||||
| 2-3/8 | 1.21 | 1.60 | 2.03 | 2.89 | 3.65 | |||
| 2-1/2 | 1.28 | 1.69 | 2.14 | 3.05 | 4.45 | |||
| 2-7/8 | 1.93 | 2.45 | 3.48 | 5.79 | ||||
| 3 | 2.04 | 2.59 | 3.70 | |||||
| 3-1/2 | 2.38 | 3.03 | 4.33 | 5.30 | 6.86 | |||
| 4 | 3.47 | 4.97 | ||||||
| 5 | 6.26 | |||||||
| 6 | 4.12 | 5.25 | 7.54 | |||||
| 8 | 7.02 | 10.10 | ||||||
| 10 | 11.15 | 13.84 | ||||||
| 12 | 13.41 | 15.05 | ||||||
| All material offer as mill finish, polished 180 grit or polished 320 grit | ||||||||
| All material produced to ASTM A554 specification (Latest Revision) | ||||||||
